EAGLE CAD - Completing The Board

At this moment we have only a board file with all the devices footprints and highlighted connections inside. To finish the board we have to put every footprint in a position we find useful and replace the airwires with actual traces.

Before we start keep in mind one thing: the traces can be routed (with Route Tool) on both layers of the board: top (red) or bottom (blue).

So... using the Move Tool we place every device in the right place:

EAGLE CAD - Arrange Every Component On The Board In The Right Place

Then we use the Route Tool to create the actual traces, connecting the terminals/pins highlighted by airwires.

EAGLE CAD - Board With Routed Signals