![]() |
| EAGLE CAD - How To Save Your File As PDF |
Tuesday, March 4, 2014
EAGLE CAD - Save a schematic/board as PDF file
To do that just press the Print button or follow the path File > Print. The Print window appears. On the Printer field chose the Print to File (PDF) option.
Monday, March 3, 2014
EAGLE CAD - Creating Transparency Films From The Board Editor
We just finished our Board schematic in Eagle. What now? Well... we're moving to the real world by creating the transparency films used to manufacture the PCB's.
In the Board Editor select the Layer settings button. The Display window appears. Click on the None button to deselect all the layers.
To create the bottom filter select the following layers:
Now you can print the transparency film for the top layer too. For information about how you can make a real PCB using the transparency films you just printed, read this.
In the Board Editor select the Layer settings button. The Display window appears. Click on the None button to deselect all the layers.
![]() |
| Click the Layer settings button |
![]() |
| Click the None button to deselect all the layers |
To create the bottom filter select the following layers:
- 16 Bottom
- 17 Pads
- 18 Vias
- 20 Dimension
- 45 Holes
![]() |
| The Circuit Board Ready For Printing The Bottom Layer Transparency Filter |
Click on the Print button or follow the path File > Print. The Print window appears. After selecting the printer, paper type, orientation and alignment, set the area to full. The scale factor and page limit should be 1. In the Options area just the Black and Solid options should be checked. Set the Calibrate values to 1 and the Border values to 10.
![]() |
| Printer Settings For The Bottom Layer |
Go one... you're ready to print the transparency film for the bottom layer. Click the OK button.
For the top filter you should select the following layers:
- 1 Top
- 17 Pads
- 18 Vias
- 20 Dimension
- 45 Holes
![]() |
| The Circuit Board Ready For Printing The Top Layer Transparency Filter |
The printer setting are the same as to the bottom layer, but in the Options area you also should check the Mirror option.
![]() |
| Printer Settings For The Top Layer |
Now you can print the transparency film for the top layer too. For information about how you can make a real PCB using the transparency films you just printed, read this.
How To Make A PCB (Printed Circuit Board) - WORK IN PROGRESS
There are a lot of methods used for PCB manufacturing, but for the everyday hobbyist two of them step up in terms of accessibility and quality: making PCB's by photo-etching method and by milling (with a CNC).
This will be about the photo-etching method. Why? Simply because it allows you to create double-sided PCB at a high quality using easy accessible materials.
What do you need?
This will be about the photo-etching method. Why? Simply because it allows you to create double-sided PCB at a high quality using easy accessible materials.
What do you need?
- PCB Design Software (yes, like Eagle CAD).
- One printer - after some years of testing I've settled down with a simple inkjet printer (higher printing resolution is better) .
- Transparency film - A4 sheets, no matter what brand as long as it is compatible with your printer (one example is the HP Premium Inkjet Transparency Film).
- Photoresist PCB's - you can make your own but it's no worth. You can find everywhere PCB's already covered with photoresist (Bungard Elektronik is one of the greatest manufacturers in this area).
- Sodium Hydroxide (NaOH) for etching the photoresist. Special care is required to prepare the solution: 7 grams NaOH for every liter of water (H2O).
- Ferric Clorhidre (FeCl3) for etching the cooper. You can buy it directly as a solution.
- One UV light source. I use a DIY UVbox which will be discussed in another article.
Additional materials are needed if you plan to make double-sided PCB's, solder masks, silk layers, ...
To create the PCB you need to go trough the following steps:
1. Create the circuit schematic (using the PCB Design Software).
2. Based on the schematic, create the board/layout (also using the PCB Design Software).
3. Print the transparencies for every layer of the board (bottom, top and bottom). Pay special attention on printing the top layer - it has to be mirrored!
4. If you are going double-side, align the two layers.
5. Make a sandwich out of the transparency films and the photoresist PCB. Expose every side of it to UV light. The exposing time depends on the light source. You'll have to make some experiments first.
6. Etch the exposed photoresist by emerging the board in NaOH solution.
7. Wash the board with clean water and dry it. Pay special attention not to scratch the photoresist traces.
8. Etch the exposed cooper by emerging the board in FeCl3 solution. Ideal results are obtained at a temperature of 60C.
9. Wash the board and solder the components - the simplest PCB. If you're going the hard way you still have to apply the solder mask, silk layer or to solder the vias.
EAGLE CAD - How To Copy A Symbol From A Library To Another
First of all open the library that contains the symbol you need (from Control Panel window follow the path File > Open > Library). Click on the Symbol Tool located on the toolbar of the Library window you just opened. This will open the Edit window where you will locate and double-click the desired symbol, which will be opened in the library window.
Select all the components of the symbol using the Group Tool.
Click on the Copy Tool and right-click on the symbol. In the pop-up menu that appears select the Copy Group option.
Now close this library and open the library in which you need the symbol.
Click the Symbol Tool and insert the name of the symbol inside the Edit field. Click the OK button. On the Warning message click Yes.
What you still have to do is to simply paste the copied symbol using the Paste Tool. Place the symbol wherever you want on the workspace and save it (CTRL + S).
Your new symbol is ready to use!
![]() |
| EAGLE CAD - Double-click The Desired Symbol From The Edit Window |
Select all the components of the symbol using the Group Tool.
![]() |
| EAGLE CAD - Select The Entire Symbol Using The Group Tool |
Click on the Copy Tool and right-click on the symbol. In the pop-up menu that appears select the Copy Group option.
![]() |
| EAGLE CAD - Copy The Entire Group |
Now close this library and open the library in which you need the symbol.
Click the Symbol Tool and insert the name of the symbol inside the Edit field. Click the OK button. On the Warning message click Yes.
![]() |
| EAGLE CAD - Insert The Name Of The Symbol Into The Edit Field |
![]() |
| EAGLE CAD - Click the Yes Button On The Warning Mesage |
What you still have to do is to simply paste the copied symbol using the Paste Tool. Place the symbol wherever you want on the workspace and save it (CTRL + S).
![]() |
| EAGLE CAD - The Symbol Is Pasted Into The New Library |
Your new symbol is ready to use!
EAGLE CAD - How To Copy A Package From A Library To Another
For start open the library in which you wish to have the package (File > Open > Library).
Go to the Control Panel window and expand the Libraries folder (left side of the window). Locate the library that contains the package you need and expand it. By experience I will say that the libraries
ref-packages.lbr and ref-packages-longpad.lbr will do 90% of the work. You can find here almost every package you need. Find the package you need and right-click it. On the pop-up menu select Copy to library. This will copy the selected package to the opened library.
Now the package is available in the desired library.
![]() |
| EAGLE CAD - Open The Target Library |
Go to the Control Panel window and expand the Libraries folder (left side of the window). Locate the library that contains the package you need and expand it. By experience I will say that the libraries
ref-packages.lbr and ref-packages-longpad.lbr will do 90% of the work. You can find here almost every package you need. Find the package you need and right-click it. On the pop-up menu select Copy to library. This will copy the selected package to the opened library.
![]() |
| EAGLE CAD - Copy The Desired Package To The Target Library |
Now the package is available in the desired library.
Subscribe to:
Posts (Atom)














